- Home
- Equipment
- Non-Current Models
- Non-Current Telehandlers
- T35.130S Construction Telehandler
T35.130S Construction Telehandler
T35.130S Construction Telehandler
Years of Production: 2021-2024
This is a non-current model and is no longer offered by Bobcat. Please see the current model by clicking here: T36.120SL Construction Telehandler
You can also use the buttons below to shop for parts or find your nearest Bobcat dealer for service, parts, and sales inquiries.
Reach high and far with the Bobcat R-Series T35.130S Telehandler thanks to a low center of gravity, long wheelbase, heavy counterweight, and optimum weight distribution. Handle daily tasks with a familiar, intuitive automotive-style layout and an all-in-one joystick with improved ergonomics.
T35.130S Specifications
Compare
Key Specifications
T35.130S Construction Telehandler
Rated Capacity
3500 kg
Lifting height
12.5 m
Rated power (ISO 14396)
74 kW
Max reach
8.8 m
Unladen weight
8520 kg
Dimensions
T35.130S Construction Telehandler
Overall length (to forks tip)
7081.00 mm
Overall length (to forks face)
5876.00 mm
Overall length (to headstock pin)
5541.00 mm
Overall length (to front tyres / Stabilizers (when equipped)
4950.00 mm
Overall height (with rotating beacon)
2586.00 mm
Overall height (with roof wiper)
2430.00 mm
Height back of the machine
1869.00 mm
Ground clearance
422.00 mm
Length - Front axle to forks face
1919.00 mm
Wheelbase
2850.00 mm
Length - Rear axle to machine rear
1107.00 mm
Operator cab outside width
930.00 mm
Track width
1992.00 mm
Width over standard tyres
2418.00 mm
External turning radius (at tyres)
4150.00 mm
Internal turning radius (cab)
1519.00 mm
External turning radius (with forks spaced 1040 mm ext.)
5696.00 mm
Carriage rotation angle
124.00 °
Performance
T35.130S Construction Telehandler
Rated capacity
3500.00 kg
Capacity (at max. height on tyres)
1000.00 kg
Capacity at max. height on stabilizers
3500.00 kg
Capacity at max. reach on stabilizers
1300.00 kg
Lifting height
11658.00 mm
Lifting height on stabilizers
12468.00 mm
Tilt Breakout force
12300.00 daN
Drawbar pull (20" tyres)
5700.00 daN
Drawbar pull (24" tyres)
4900.00 daN
Max. gradeability (20" tyres)
24.00 °
Max. gradeability (24" tyres)
24.00 °
Max. reach
8764.00 mm
Lifting height on stabilizers (20" tyres)
12468.00 mm
Lifting height on stabilizers (24" tyres)
12552.00 mm
Max. reach on stabilizers (20" tyres)
8760.00 mm
Max. reach on stabilizers (24" tyres)
8600.00 mm
Cycle times
T35.130S Construction Telehandler
Boom raising
14.00 s
Boom lowering
8.50 s
Boom extension
18.00 s
Boom retraction
11.50 s
Crowding
5.00 s
Dumping
4.50 s
Weights
T35.130S Construction Telehandler
Unladen weight (20" tyres)
8520.00 kg
Unladen weight (24" tyres)
8620.00 kg
Engine
T35.130S Construction Telehandler
Make / Model
PERKINS / 1104D-44TA
Fuel
DIESEL
Rated power (ISO 14396)
74.00 kW
Rated speed
2200.00 RPM
Maximum torque at 1400 rpm
410.00 Nm
Number of cylinders
4.0
Displacement
4.40 L
Hydraulic system
T35.130S Construction Telehandler
Pump type
Gear pump with LS valve
Pump capacity
100.00 L/min
Relief valve pressure setting
250.00 bar
Control valve type
Open center with flow sharing & flow compensators technology
Drive system
T35.130S Construction Telehandler
Transmission
Hydrostatic with electronic regulation
Main Drive
Hydrostatic motor
Traction
T35.130S Construction Telehandler
Standard Tyres
405/70-20 16PR TM R4
Max speed - turtle mode (24" / 20")
8,5 / 7
Max speed - rabbit mode (24" / 20")
30 / 26
Brakes
T35.130S Construction Telehandler
Engine Braking
Hydrostatic
Parking and Emergency brake
Passive brake
Service Brake
Oil immersed discs
Steering
T35.130S Construction Telehandler
Steering Mode
2 wheel steering / 4 wheel steering / Crab-steering
Fluid Capacities
T35.130S Construction Telehandler
Fuel tank
145.00 L
Hydraulic tank
76.00 L
Hydraulic system
155.00 L
Environmental
T35.130S Construction Telehandler
Whole body vibration (EN 13059)
1.40 ms2
T35.130S Construction Telehandler
TL26.60 Agricultural Telehandler
Compare
TL26.60 Construction Telehandler
Compare
T35.130SLP Construction Telehandler
Compare
T35.140S Construction Telehandler
Compare
T35.105 Construction Telehandler
Compare
Key Specifications
T35.130S Construction Telehandler
Rated Capacity
3500 kg
Lifting height
12.5 m
Rated power (ISO 14396)
74 kW
Max reach
8.8 m
Unladen weight
8520 kg
Dimensions
T35.130S Construction Telehandler
Overall length (to forks tip)
7081.00 mm
Overall length (to forks face)
5876.00 mm
Overall length (to headstock pin)
5541.00 mm
Overall length (to front tyres / Stabilizers (when equipped)
4950.00 mm
Overall height (with rotating beacon)
2586.00 mm
Overall height (with roof wiper)
2430.00 mm
Height back of the machine
1869.00 mm
Ground clearance
422.00 mm
Length - Front axle to forks face
1919.00 mm
Wheelbase
2850.00 mm
Length - Rear axle to machine rear
1107.00 mm
Operator cab outside width
930.00 mm
Track width
1992.00 mm
Width over standard tyres
2418.00 mm
External turning radius (at tyres)
4150.00 mm
Internal turning radius (cab)
1519.00 mm
External turning radius (with forks spaced 1040 mm ext.)
5696.00 mm
Carriage rotation angle
124.00 °
Performance
T35.130S Construction Telehandler
Rated capacity
3500.00 kg
Capacity (at max. height on tyres)
1000.00 kg
Capacity at max. height on stabilizers
3500.00 kg
Capacity at max. reach on stabilizers
1300.00 kg
Lifting height
11658.00 mm
Lifting height on stabilizers
12468.00 mm
Tilt Breakout force
12300.00 daN
Drawbar pull (20" tyres)
5700.00 daN
Drawbar pull (24" tyres)
4900.00 daN
Max. gradeability (20" tyres)
24.00 °
Max. gradeability (24" tyres)
24.00 °
Max. reach
8764.00 mm
Lifting height on stabilizers (20" tyres)
12468.00 mm
Lifting height on stabilizers (24" tyres)
12552.00 mm
Max. reach on stabilizers (20" tyres)
8760.00 mm
Max. reach on stabilizers (24" tyres)
8600.00 mm
Cycle times
T35.130S Construction Telehandler
Boom raising
14.00 s
Boom lowering
8.50 s
Boom extension
18.00 s
Boom retraction
11.50 s
Crowding
5.00 s
Dumping
4.50 s
Weights
T35.130S Construction Telehandler
Unladen weight (20" tyres)
8520.00 kg
Unladen weight (24" tyres)
8620.00 kg
Engine
T35.130S Construction Telehandler
Make / Model
PERKINS / 1104D-44TA
Fuel
DIESEL
Rated power (ISO 14396)
74.00 kW
Rated speed
2200.00 RPM
Maximum torque at 1400 rpm
410.00 Nm
Number of cylinders
4.0
Displacement
4.40 L
Hydraulic system
T35.130S Construction Telehandler
Pump type
Gear pump with LS valve
Pump capacity
100.00 L/min
Relief valve pressure setting
250.00 bar
Control valve type
Open center with flow sharing & flow compensators technology
Drive system
T35.130S Construction Telehandler
Transmission
Hydrostatic with electronic regulation
Main Drive
Hydrostatic motor
Traction
T35.130S Construction Telehandler
Standard Tyres
405/70-20 16PR TM R4
Max speed - turtle mode (24" / 20")
8,5 / 7
Max speed - rabbit mode (24" / 20")
30 / 26
Brakes
T35.130S Construction Telehandler
Engine Braking
Hydrostatic
Parking and Emergency brake
Passive brake
Service Brake
Oil immersed discs
Steering
T35.130S Construction Telehandler
Steering Mode
2 wheel steering / 4 wheel steering / Crab-steering
Fluid Capacities
T35.130S Construction Telehandler
Fuel tank
145.00 L
Hydraulic tank
76.00 L
Hydraulic system
155.00 L
Environmental
T35.130S Construction Telehandler
Whole body vibration (EN 13059)
1.40 ms2
T35.130S Features
Performance
2
Reach high and far
The superior stability and balance of our Telehandlers means that most jobs do not require stabilizers. We designed the machine with a low center of gravity, long wheelbase, heavy counterweight, and optimum weight distribution – so you can reach high and far while handling heavy loads with ease in any position. Bobcat Telehandlers are stable by nature!
Compact stabilisers
The easy-to-use compact stabilizers ensure that you can use the machine’s full capabilities in the most confined working areas, even close to a wall. In addition to safe working practice, stabilizers give you a big advantage when you need to get close to a building without losing reach.
Uptime Protection
1
Shielded design
All vital components of your machine are located inside the
highly rigid boom and frame. The frame itself features a robust
box section. The machine’s cylinders, hydraulic systems and
electric harnesses stay well-protected at all times. A steel bottom plate fully protects against shocks coming from the ground.
Ease of use
8
Control at Any height
Bobcat telehandlers provide you with surgical-precision control at any height – thanks to the incredibly smooth transmission, our Boom Positioning System (if equipped), an ergonomic joystick, the inching function, and great visibility from the cab.
All-around visibility
Because it means safety and productivity, we made numerous efforts to give to the operator an excellent visibility.
Lateral visibility thanks to the low-profile engine hood, on the load thanks to the streamlined dashboard, and on top thanks to the optimized FOPS grid.
Butter-smooth automatic transmission
The butter-smooth hydrostatic transmission provides your choice of precise movements or agility. Hydrostatic technology enables automatic drive, inching function for slow delicate approaches, and reduced machine inertia for safe operation on job sites.
Compactness and maneuverability
A big machine can mean big challenges. But with the emphasis on maneuverability, Bobcat Telehandlers thrive on constrained job sites.
First-class comfort
Enjoy the roomy cab with its great comfort features: easy cab access, suspended seat, 360 ergonomics (thanks to the central control panel), and many more. This first-class user experience is further enhanced by amazing visibility.
Interactive LCD display
A clear, easy-to-read overview of all operating parameters ... at the touch of a button. Available in 5-inch or 7-inch with touchscreen as an option, the highly intuitive menu enables navigation via jog shuttle. If equipped, the rear-view camera feed is shown automatically when reversing.
The optional 7" touchscreen display (compatible with gloves) contains a built-in Bluetooth radio, microphone, loudspeakers, phone page and Job Manager (memorization of up to 6 operator setting configurations).
Intuitive Operation
Bobcat makes it easy to simply start working – with a familiar automotive-style control layout, an interactive display, an all-in-one joystick with improved ergonomics, color-coded control elements, and automatic parking brake.
All-in-one & precise joystick
The joystick’s highly ergonomic handle was redesigned with operator feedback. The most important controls are located at your fingertips at all times: drive direction, turtle/rabbit modes, boom movements, auxiliary controls, and shift-on-the-fly settings. Smooth stiffness delivers very precise placements of the load!