E26 Mini Excavator

E26 Mini Excavator

The new generation of the popular Bobcat® E26 compact excavator (mini excavator) is an easy-to-use, robust machine optimized for specific rental industry needs while introducing the next level of operator comfort and features required by demanding owner operators. The new E26 excavator has a transport weight reduced by 100 kg but increased over-the-side lifting capacity. To overcome a common issue in the rental market and thus protect the uptime, the E26 is now equipped with extra innovative features such as the Cylinder-Inside-Boom (CIB) workgroup and its geometry, increasing protection against bucket collision with the cab.

E26 Specifications

Compare

Key Specifications

Operating weight
2608 kg
Digging depth
2.6 m
Engine power
15.4 kW
Digging breakout force
15690 N
Tail swing type
RTS 

Key Specifications

Operating weight
2608 kg
Digging depth
2.6 m
Engine power
15.4 kW
Digging breakout force
15690 N
Tail swing type
RTS 

Weights

Operating weight with cab and bucket (ISO 6016)
2608.00 kg
Transport mass (no attachment)
2477.00 kg
Weight reduction with canopy
-118.00 kg
Ground pressure with rubber tracks
30.30 kPa

Working Range

Bucket pivot angle
185.00 °
Maximum reach of working equipment
4542.00 mm
Maximum reach at ground level
4413.00 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2052.00 mm
Maximum blade height
385.00 mm
Maximum blade depth
420.00 mm
Maximum height of working equipment with dipperstick retracted
3104.00 mm
Maximum bucket tooth height
4006.00 mm
Maximum dump height
2845.00 mm
Maximum depth of vertical wall which can be excavated
1474.00 mm
Maximum digging depth
2568.00 mm

Dimensions

Blade height
319.00 mm
Clearance, upper structure to ground line
539.00 mm
Ground line to top of engine cover
1540.00 mm
Length of track on ground
1543.00 mm
Machine centre line to blade
1462.00 mm
Minimum radius in travel position
3192.00 mm
Overall length of track assembly
1965.00 mm
Overall length in travel position
4174.00 mm
Track lug height
21.00 mm
Blade width
1500.00 mm
Height
2438.00 mm
Track width
250.00 mm
Machine centre line to working equipment centre line, left-hand rotation
580.00 mm
Machine centre line to working equipment centre line, right-hand rotation
705.00 mm
Minimum turning radius
1755.00 mm
Swing clearance, rear
820.00 mm
Working width at maximum right-hand rotation
1741.00 mm
Working width at maximum left-hand rotation
1616.00 mm

Engine

Make / model
Yanmar / 3TNV76-PBC (Stage V) 
Fuel
Diesel 
Number of cylinders
3 
Displacement
1116.00 cm3
Maximum power @ 2400 rpm (ISO 14396)
14.90 kW
Maximum torque @ 1800 rpm (SAE J1995)
66.30 Nm

Hydraulic System

Pump type
Dual outlet variable displacement piston pump with gear pumps 
Total hydraulic capacity
94.25 L/min
Piston pump capacity
67.50 L/min
Auxiliary (AUX1) flow
53.75 L/min
Auxiliary (AUX2) flow
20.00 L/min
Auxiliary (AUX1) relief
180.00 bar
Auxiliary (AUX2) relief
179.00 bar

Performance

Digging force, dipperstick (ISO 6015)
15690.00 N
Digging force, bucket (ISO 6015)
23720.00 N
Drawbar pull
29080.00 N
Travel speed, low range
2.50 km/h
Travel speed, high range
4.30 km/h

Slew System

Boom swing, left
60.00 °
Boom swing, right
60.00 °
Slew rate
9.30 RPM

Fluid Capacities

Fuel reservoir
34.40 L
Hydraulic reservoir
10.20 L

Environmental

Noise level LpA(EU Directive 2006/42/EC)
80.00 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
93.00 dB(A)
Whole body vibration (ISO 2631–1)
0.11 ms2
Hand-arm vibration (ISO 5349–1)
0.50 ms2

Standard Features

1500 mm dozer blade
yes 
250 mm rubber track
yes 
Adjustable double acting auxiliary hydraulic (AUX1) with Quick Couplers
yes 
Battery disconnect switch
yes 
Blade float feature
yes 
Control console locks
yes 
Cupholder
yes 
Dual Direction Detent
yes 
Engine/hydraulic monitor with shutdown
yes 
Foldable and ergonomic travel pedals
yes 
Full fuel warning alarm
yes 
Horn
yes 
Proportional fingertip auxiliary and boom swing offset hydraulic control
yes 
Retractable seat belt
yes 
Seat with high back
yes 
Storage compartment
yes 
TOPS/ROPS/FOPS canopy *
yes 
Two-speed travel with Auto shift
yes 
Upper structure four-point tie down
yes 
Work light (boom)
yes 
Water separator
yes 
Warranty: 24 months, 2000 hours (whichever occurs first)
yes 

Options

Object handling package (Valves, OWD, Lifteye)
yes 
TOPS/ROPS/FOPS cab
yes 
AUX1 direct return to tank
yes 
AUX2 hydraulics
yes 
AUX1/AUX2/Drain on arm
yes 
Case drain line
yes 
Auto idle
yes 
Keyless ignition
yes 
Travel motion alarm
yes 
AM/FM MP3 radio
yes 
Additional halogen lights
yes 
Beacon
yes 
Dlx textile suspension seat
yes 
Special application kit
yes 
L/R mirrors
yes 
Klac D and MS03 coupler
yes 
Bobcat hydr. pin grabber
yes 
Grease Gun Set (Gun + Holder in Machine)
yes 
Demolition package (arm & bucket cylinder covers)
yes 
Hydr. coupler lines (AUX5)
yes 

E26 Features